Church cool rubber band bracelets design should pay attention to what,multi coloured wristbands

Color masterbatch is the functional material for colors of the wristband. Pigment, carrier, additive is component of color masterbatch. We add it at the same time with curing agent to silicone plastic.  multi coloured wristbands; Color masterbatch makes pigment has better dispersion in the product, keep chemical stability and stability of color. If the logo is colored, the silicone printing ink will be used. Silicone printing ink is suitable for silicone plastic product, the logo will be durable with the ink. What contains in the ink ? They are silicon dioxide, pigment, silicone oil and solvent. When the ink is dried, some of the component will evaporates. Glowing powder is a kind of rare earth that absorbs and store light energy, and release light in the dark. We will add it to a glowing wristband. The glow light last several hours and it is recyclable.     event-wristbands-walmartpolynesian-wristband-tattoo-designs

, no big-name stars use it as their decorations, making you cool and full of flavor! As for the production process of silicone wristband, it is estimated that not many people have fully understood it. Pinshang Silicone explains the whole production process of silicone wristband. Design of artwork The design of artwork is generally based on the size of the sample artwork provided by the customer. Graphic drawing software, such as CDR or AI software, is generally used to make the artwork. If the customer cannot provide the sample artwork, we can cooperate with the customer to complete the design and production of the artwork free of charge according to the customer"s requirements. Open mold The mold opening is that the mold master creates an offset plate according to the designed artwork, then uses the offset plate to carve a copper worker, and finally carves a steel mold with the copper worker. Some hand ring craft moulds have a relatively high technical content and take a relatively long time to produce. Generally, the mold opening period is calculated by five days. With the mould, the production will be quick. Toner refining According to the color number on the international Pantone color card specified by the customer, our color mixing ratio is aligned and the color difference is minimal. Approval materials The materials required for each wristband are weighed by an electronic scale. Generally, the wristband weighs about 5.5 grams. Upper die production After the mould is finished, it is produced on the machine. After the mold is installed, the machine needs to be warmed up. A 9-mold machine produces about 15000 pieces per day. Quality inspection After the wristband is produced, the product shall be inspected and checked, mainly to see if it meets the specifications. If it does not meet the specifications, it will be discarded. deburring Each wristband is produced with a residual edge. After the quality inspection department passes the inspection, the product is sent to the post-process department for trimming. (Average trimming quantity per person per day is about 3,000 pieces). Finished product inspection After the edge is repaired, the finished product is obtained. It is also necessary to send the finished products back to the quality inspection department to check the trimming quality. If there are any unqualified products, they will be scrapped. Packaging After the repaired products pass the inspection, they shall be packaged according to the customer"s requirements. Packaging is divided into PP bag independent packaging and naked packaging. Both are 100 pieces in a pack. Usually 20 packs per carton (2,000 pieces) are standard export containers. Packing is generally required by customers. Inspection before sealing After the packaging is completed, the quality inspection department will check the quantity. if there is no problem, seal the case and send it to the warehouse for delivery.             silicone-wristbands-size-chart

cool rubber band bracelets

Production process First: Drawing design Second: Mould opening Third: color mixing Fourth: Approval materials Fifth: Upper Mould Production Sixth: Quality Inspection Seventh: trimming Eighth: Inspection of finished products Ninth: Packaging Department Tenth: Inspection before sealing After the packing is finished, the quantity is checked by the Inspection Department. If there is no problem, it is sealed and sent to the warehouse for delivery.24hourwristbands.ca is best bracelet maker rubber.They are the premier supplier of Wristbands, silicone wristbands, rubber bracelets, silicone bracelets, cheap wrist bands, custom wristbands, printed wristbands, personalized wristbands and rubber wristbands. We are the largest manufacturer of custom wristbands in the world.  We print on the best quality custom wristbands.  &nmulti coloured wristbandsbsp;        animal-bracelets-rubber-bandswarfarin-silicone-bracelet