Next Level Apparel on sale at FeshirStore

We also offer custom screen printing. Please fill the form below or contact us for more information.

Next Level Apparel 3530 Ladies Scoop Neck Tee

Next Level Apparel 3200 Mens Premium Fitted V-Neck Tee

Next Level Apparel 3300L Ladies Perfect Crewneck Tee

Next Level Apparel 3600 Mens Crew Neck Tee Premium Fitted Crewneck Tee

Next Level Apparel 3900 Ladies Boyfriend Crewneck Tee

Next Level Apparel 6010 Mens Tri-Blend Crewneck Tee

Next Level Apparel 6040 Mens Tri-Blend V-Neck Tee

Next Level Apparel 6200 Poly Cotton Mens Tee

Next Level Apparel 6240 Mens CVC V-Neck Tee

Next Level Apparel 6533 Ladies Burnout Razor Tank

Next Level Apprel 3400L Ladies Sporty V-Neck Tee

For Sale

in subject line – Put ad copy in body of email. Send .jpg of photo as an attachment. Only attachments will be considered for VFT Ads! Do Not embed photos in email! No Photo buckets, Word files, Zip files or any other kind of non jpg. I wont go looking for your photo.

. Phone photos will look like you send, no massaging to try to make it acceptable. Please state what city or state you are located! There is no charge for adds – send um. But I do reserve the right of refusal.

When it sells, or when you want a copy change,

SEND ADS f sent to other email accounts they may be missed.

When ad is up, check for correct phone s and email address. Remember, readers want location of bikes.

I have had a few inquires about sending along a little something to VFT for posting For sale ads on this site.

309 West Rialto Street Clovis, California 93612-4331

Remimder, Dont send anybody money unless you have a phone conversation with them and the phone connection is good and clear and they answer the phone, not just a call back with poor reception! If only email, ask for a number and dont stand for excuses, this is America, everyone has a phone. Ask probing questions, Scamers dont know shit about motorcycles!

J&M 450 Suzuki , 06 Roy Built Motor – Weiss adjustable clamps, R6 Forks, New RK Chain, Vortex (Murphy) Bars, Aluminum CR 125 Tank, New Paint, Breakaway Clutch Lever, ShowaShock. $6,000

2001 THOR FUNMOVER – 27 ft., 52k , Onan generator, roof hatch, new tires, built in ramps, new rear door, 2 roof air conditioners, sleeps 6, full kitchen , full bath, diamond plate floor in garage area!

New Price $19995 – Partial trades considered.

2011 KTM 450 SX-F Flat Track Dirtbike, Title in hand, rebuilt motor with one full season on rebuild, Fully built by Jr. Jackson @ FMC, Sounds Beautiful, Runs Strong, and looks great, Factory Connection Suspension, Wide Rims with GNC compliant tires, Rear Stand, Sprockets, box of extra parts, any and all accessories included. Located in Quarryville, PA.

Knight-framed 1979 XR500 Honda, MegaCycle 144×21 cam, Wiseco piston, Carrilla Rod, Racing valve springs, lh and rh shift. (Black motor). The silver (extra) motor is built the same, except it is LH shift and has remote start. The bike has Telltale Tach, Deadman switch, Maxxis front and rear, and is very fast and quick!

$6500 for the package. Also included is an extra CDI and a few assorted small parts.

Call: Gerald Chism, Springfield, MO 417.276.9908

For sale is a complete set (2) of Mikuni 36mm carbs + the motor mounts. They are off my 72 Yamaha XS650 street tracker.

2017 Coachman 17BLSE Toy Hauler – Used twice – no water has been thru it. LOTS of extras, save THOUSANDS over new. Stored inside, located in Cleveland, OH. $15,900

82 Honda VFR 750 Interceptor ( 2 bikes ) 6500 & 25,150 mi, Fox Shock, 1 title, enough to make one REAL nice bike $ 1995

79 Yamaha MX 100 LOW hours, NICE $ 1095

82 Yamaha XV920R , GSXR Forks & Rear wheel, Big Bore Kit, smooth bore carbs, clip ons, HMF exhaust, COOL $ 3495

77 Honda GL 1000, Caf Racer, Progressive Front End, Shocks, new motor VERY Cool $6495

04 Kawasaki EX 250 Trophy Winning Race Bike, 17s, SV shock, all good stuff, inc 2 parts bikes $3495

01Suzuki DL1000 V Strom, 20K mi no title $ 1795

04 Suzuki DRZ 200, 686mi MINT $2500

85 Suzuki GS700E, 8500mi, new alt & cover, chain, nice $1195

2015 Harley Davidson XG750 – Recently built hooligan, street tracker style motorcycle. Never raced. Weiss adjustable trees. R6 forks – Sun rims – Quick change wheels. Flint, MI

Norton Tracker, C&J frame, Brembo brakes, Marzoochi forks, aluminum tanks, stainless exhaust, Oley, Pa

For sale is what I believe to be a Sonic Weld framed 350 Honda. Motor has a fresh mild performance rebuild. Frame appears to have been modified to take the Honda twin motor. Would make a neat indoor or short track bike. Comes with a nice pair of Jemco exhaust pipes. Near San Jose, Ca.

1990 CR250/310 – Super Fast Engine Available, CR250/310. Big Bore Kit, DPY Domed Cool Head, Spare Big Bore Cylinder & Piston, Barnett Clutch, Kehin 38MM Air Stryker Carb. 3 Down Pipes, 1 NPP, 2 Jemco.

NOS Pirelli Universal Tire. MT53 4.00-19. Asking $150 plus shipping.

Located in Wadsworth, Ohio. Possible low cost shipping to Mid-Ohio or Frederick Maryland the first weekend in July.

Stock SR500 18 wheel with Dunlop K180 mounted. Includes rotor and sprocket (45t), both in good shape. Tire is old- dated 01- but in okay shape, lots of tread and no cracks.

Can-Am TnT 250 1975 competition exhaust. Looking for any competition parts, especially exhaust, shocks, wheels.

Mike on Vancouver Island 250 668 9377. Thanks

1968 Montesa 360 Cappra short tracker. Very consistent winner of the Classic 500 brakeless class. Betor forks – NJB shocks – Spool front – Quick change rear – Custom pipe – Mikuni carb – Stock ignition. Top end a few races ago. Race ready. Have orange or blue or white & red fuel tank, your choice. Palmdale, California. Can ship.

Super clean Honda CRF150R flat tracker. Durelle suspension, 17 Excel wheels, fresh Shinko rubber, Tag aluminum bars, new chain and rear Renthal sprocket. Bike starts easy and runs strong. Located in North Central Indiana.

Info wanted! Hi I just bought this bike and the previous owner didnt know anything about it. I would like to know what the swingarm and forks are. Possible the front hub too. Thanks!

Looking for Kawasaki 650 twin chassis. Closer to a roller the better. Baer frame preferred, but open to options.

Have a 2000 ATK605 to use as partial trade. I was going to dual sport it, but think Id rather have a chassis for my spare Kawi motor. ATK runs strong- all stock as far as I know. Has new DID o-ring chain, pro-taper sprockets, rear wheel bearings, front brake pads, fork seals/oil, and oil/filter just changed. I have a new headlight/tail light that I bought for it, but have not installed yet. Bike is ready to ride, and would be an easy conversion to dual sport. Let me know what you have and what kind of $$ difference you would need for the trade.

INDIAN MOTORCYCLE KIDDY RIDE, NICE SHAPE ORIGENAL INDIAN KIDDY RIDE WORKS GREAT THE COIN OPP WORKS GOOD COOL PEICE FOR YOUR GAME ROOM. THESE ARE VERY RARE.

600 Rotax Missle Single Shock Frame, Weiss Fully ajustable front end, R6 Forks, PM Wheels, Saddleman Seat, Darcy Heads, ex Rich King Bike, Built by the best. Race Ready Very Fast. Fort Wayne, Indiana

Hi Dennis, my name is Chris Allan. I am contacting you from Australia regarding this bike I purchased around twenty years ago. I have sent photos of the bike and the add when I purchased it and also a picture of the registration sticker that was on the Ceriani forks, from the state of Virginia. when i went looking for AL Basnight online around 2009, I found this obituary, sadly AL had passed away. but it did say that he was director of development for nascar australia. Now the story the seller told me was AL worked for a man named BOB JANE, he is a large tyre retailer here in Australia, BOB JANE T MART. BOB JANE was trying to get nascar racing up and running here back in the 1980s and built a banked oval track in Melbourne, thats when AL and this bike came to Australia – in theory when I found the obituary I noticed the Virginian Pilot newspaper reference and then realised the rego sticker on the forks was from the state of Virginia ( see photo ) in 1988. given the bike had parts that were made in the US, Circle industries alloy rear sprocket, Acme chain, Lipp products fibreglass fuel tank, Preston Petty hand grips, helped confirm to me that bike came from the US, because in theory you wouldnt buy those parts from the US to put on a bike over here when we dont race this class in this country sadly. I would really like some help trying to track down more of the bikes history, I have found this info and a reference to man named DUSTIN STANLEY , AL was his uncle and Dustin was a shock specialist for the Richard Childress race team in nascar xfinity series for Ryan Scott around 2014 – 15 those details are a from memory, i lost the link to that page. so at this point I will try and keep this short for now i just wanted to touch base with you guys with this info and if you need to forward this on feel free. mate any help with this would be greatly appreciated – in theory theres a really good story here.

Trackmaster frame and swingarm (no swing arm bolt) Had a Yamaha Twin 2 stroke in it TD2 – Setup for right hand shift conversion (comes with shaft and linkage) – Located in Los Angeles, Ca (will ship at buyers expense)

Two pickup loads of BSA a65 parts. Asking 4k for all. Make offer. Better pics can be provided if any serious interest. Located Stockton, Cal. Local pick up only!

Suzuki tm tank rusty inside but saveable 100.00 offer

All prices negotiable but are plus freight from Stockton, Cal.

2006 KX450F – Ready to race, Maller motor, 26 Suspension, Vortex bars. Comes with extra rear wheel, 4 rear sprockets (45-48), 14T front sprocket, spare full set of plastics, stock air box and a brand new set of Maxis Tires.

2018 Husqvarna FX450 set up for Flat Track or TT. Will be sold as new, has about 4hours on it.

I WAS GOING TO BUILD A WR CLONE, PRETTY COMPLEAT WL 45 MOTOR COMPLEAT TOP END, HAS NUMBER 6 HIGH COMPRESTION HEADS EXTRA CAM COVER TWO EXTRA OIL PUMPS TWO DIS. , COMES WITH THE LOWER PART OF THE FRAME AND A SET OF DRAG PIPES, NEEDS THE INTAKE AND SOME BOLTS I THINK THATS ALL SO WOULD BE EASY TO BUILD A WR CLONE, THERES A GUY SELLING THE REPOP WR GAS TANKS ON EBAY, I HAVE A SET OF FACTORY HARLEY RACE HUBS AND RIMES EMAIL FOR PICKS THEY ARE THE KR TYPE SET UP FOR NO REAR BRAKE, SALINA KANSAS

$4000 FOR THE MOTOR AND $1200 FOR THE WHEELS PLUS SHIPPING – I HAVE A KANSAS TITLE IT IS A 1946 WL

Before it goes to Australia, offering my 1936 Comerford JAP for sale to U.S. collector/racer. Found one year ago as garage art, formerly ridden (as best I can determine) by the late Jim Doron.

Restored as I felt it might have been campaigned at Costa Mesa or Trojan in the seventies. Not for rivet counters, it has some SAE bolts and nuts. 5 stud 1936 JAP 500 runs well with steel rod and new Arias .040 over piston, new valve springs, proper Amal twin float alky carb. Rudge clutch – direct drive sprockets included. Front wheel is 23 with Hagon magnesium hub. Rear wheel 22, hub unknown. Asking $8000

Delivered west of the Rockies. Partial trade for rigid single (BSA, etc) or Harley Davidson B, BA or C model. parts?

FYI Comerfords were ridden by the Milne brothers when they placed first and third at the 1937 World Speedway Championship in Londons Wembley Stadium.

150 has ice setup and huge amt of parts…

call or text for details. Jared Greenville, Ohio

2009 Honda CRF450r. Fresh complete engine rebuild. Brand New: Carrillo rod, OEM crank, OEM Main, and rod bearings, OEM big end pin, JE Pro Series 14:1 piston kit, Ferrea spring kit, OEM valves, and OEM timing chain. Custom bored throttle body with Brand new injector. Daniel Crower Racing head, and camshaft. K&N air filter, plus a spare K&N air filter. Oversized polished radiators. DID ERT2 Gold chain. Renthal sprockets. Boughner Suspension set up for 155. Silver Excel rims with Buchannons heavy duty stainless spokes, and stock hubs. Brand new Shinko Soft compound tires front and rear. Saddlemen custom seat. Brand new brake pads front and rear. $5200 cash only, no trades. Located in Avon Indiana. (317) 650-2006

GM engine. BZ carb. LZ clutch and layshaft. King muffler. Stuha front end. Hagon shock. Stuha straight rear section. Jawa diamond. Talon engine plates anodized black. Joker throttle anodized blue. Pro Design kill switch. Renthal bars. ASV perch and unbreakable blue anodized lever. Talon straight pull wheel set with blue anodized rims and red anodized hubs. GP style black anodized fuel tank and trick aluminum fuel cap. Maliniak Design seat. Brand new red fender set. Brand new clutch cover. Brand new blue set of JRM covers. Everything on this bike is perfectly straight and true! Located in Avon Indiana. (317)650-2006

2006 Suzuki SV 650 Race Bike / Track Bike. Fuel injected and dyno tuned to perfection. 15,475 miles. Armour Bodies Inc. Racing Body work. Hot Bodies Racing tinted wind shield. Vortex sprockets. EK520 RXO Pro Racing X Ring Chain. Dunlop Sportmax GP-A front and rear tires. Traxxion Dynamics suspension. Penske rear shock. Traxxion Dynamics AK-20 fork kit. Pitbull rear stand. Works Stand front stand. Power commander. Yoshimura Full Exhaust System. WPS Featherweight Lithium battery. CF Motorsports rear sets. Woodcraft Clipons. GPR steering stabilizer. HOK House Of Kawasaki billet aluminum black annodized front brake resorvior cap. Unbreakable and multi adjustable billet aluminum front brake and clutch levers. Everything drilled and safety wired. Spares included: One set of riser bars. One set of std height bars. Three brand new 1359 Napa Gold oil filters. One spare brake lever. One spare clutch lever. Vortex 43, 44, 45, 46, and 47 tooth sprockets. Electric cooling fan. Woodcraft clipon mount. Brand new set of Galfer Sintered brake pads for front and rear. Brand new brake fluid reservoir with cap. Brand new EK520 master link. Brand new set of bar ends. Brake reservoir cap. Located in Avon, Indiana. $3500 cash. (317) 650-2006

The Sportster Racing QuikTurn 27o Steering Kit is a simple kit you insert in your Sportster steering head with stock trees to move the rake from 30o to 27 o. Stock Harley forks were designed for street not dirt track racing. This kit changes that and gives you easier, better cornering for improved counter steer with less pushing. Kit has all parts plus an installation tool and a disassembly tool. If you want a pro class front end have Davey Durelle re-valve your fork internals. I also have a kit that allows you to install a 19 H-D wheel on the rear so you can use dirt track tires on both ends. Write me for an instruction manual. Kit $545.

FOR SALE… TOPAR BRAND 18MM OFFSET HONDA CRF450/250 2002/2008 TRIPLE CLAMPS 200.00 SHIPPED IN THE LOWER 48 .

AGV SPORT 2 PC LEATHERS. JACKET IS EURO SZ 60 (USA XL) & PANTS ARE USA 34 WAIST 28 INCH INSEAM THEY ONLY ZIP TOGETHER BY THE SMALLER ZIPPER THESE HAVE SOME WEAR BUT ALL ZIPPERS WORK 150 SHIPPED IN THE LOWER 48. PAYPAL, MONEY ORDER OR CK. CAN TEXT MORE PICTURES

I have a 1978 Honda XL 350 rolling chassis. I will sell everything individually or will sell the bike as a whole for $200 OBO – Forks $50 – Wheels $150 – Frame and swing arm $100

Handlebars $10 – Location: Hudson, Michigan

17-260-8765 text or leave a voicemail

Weslake MK5 – Nickel coated frame, new oil and fuel lines, beautiful piece for a collection or track use. Built with Maely components with previous racing ties possibly on the west coast. Located in upstate NY. Please email for more pictures and information.

Max 2 piece leathers. Great shape, no tears, holes, all zippers work. Never been on the ground. Im 6ft tall about 175lbs.The pants are a little big on me. The jacket fits real good. Im pretty broad shouldered. $400 obo.

Im looking for a known-good stock ignition coil for a 1980 model Yamaha SR500. Its a Nippon Denso 029700 with two leads (orange and black) to the CDI. Unlike the XT and TT, its 12 volt. Can pick up if its not too far from San Francisco, or prepaid mail/UPS is fine too. Thanks for looking under your bench.

In the fairly near future I will also want to buy a 34mm or 36mm Mikuni VM-series carburetor. If youve got one you could let go at a charitable price — especially if its roughly set up for an SR — kindly let me know. Other purchases may be lurking in my future as well; what have you got lying around?

Please leave a message w/your phone number at 510. Eight 6 six .4 oh too 8; Ill call you back soon. My name is James and Im in San Rafael, CA.

Here is a brand new Lester Mag Wheels it has never been mounted and it is for a Rear wheel disc set up.

It fits a Kawasaki Z1 and KZ models. Size is 3.00 X 16. Albuquerque NM

BULTACO 360 ASTRO Frame is factory team frame not a standard frame. No numbers on stem. Engine is 1975 Pursang, fresh just done. New seals, gaskets, mains, rod, piston, bore 87.5 , new paint, seat, chain, shocks, tires are old. Had knee replaced so cant race any more so selling all race bikes. Mike Caves Galesburg, IL.

1979 RM250N engine, serial RM250-38656 (the RM in this engine series stands for Race Model). I received this motor in a Project Flat Track Bike. The Owner said the motor was brand new, had been sitting on a shelf for a few years and only has a couple of hours of run time. The engine is bone stock with no mods. The head has not been off. Comes with a custom rear motor mount, complete clutch cable and CDI box with wiring. Carb that comes with the engine will need rebuilding.

$1,150 for the Engine. $350 for the Flat Track fabricated pipe. $1,300 is the package deal price.

Call, text or E-mail Alan 9l6-2O4-3l7

GET THE HEAT YOU WANT AND THE TRACTON YOU NEED!

WE MANUFACTURE TIRE WARMERS FOR SUPERBIKE, FLATTRACK, AND SUPERMOTO RACING.

FREE SHIPPING, NO TAX, COLORS OPTIONAL, $399 USD PER STANDARD SET, AND $599 USD PER DIGITAL SET

DELIVERY TIME IS 5-7 BUSINESS DAYS AFTER ORDER IS MADE AND PAYMENT PROCESSED

Honda – Curtis Sparks Built Motor – Bill Built Pipe – Race Tech Suspension. Located Bakersfield California

HONDA RS 600. I bought this bike from Kenny Roberts. It was Ronnie Jones bike. Its my best handling bike. A Terry Knight Light Frame. My Rich King RS 750 was my favorite of all time, but this is a close second. Those Grand National boys sure know how to set them up. $15K

MY 250 CanAm. Rocket Fast. Its only been ridden to test, but not yet raced. Set up for TT or Super Motard. $6.5K

TRACKMASTER HONDA CB 350. Very Fast, Very Smooth, Light and Nimble. Its just so much fun to ride. $10K

TRIUMPH 500 for the Classic 500 class. Very Fresh engine. There is also a Road Race one. They are $6K each, or $10K for the pair. They would also come with a spare engine, and 2 crates of extra parts.

CHAMPION HONDA XL 350. Its set up for TT and I occasionally ride it in Super Motard. Its in a CHAMPION MX Frame. Its light and nimble. It runs Terrific. $ 7.5K

HONDA TRACKMASTER XL 350. This is one of my Championship bikes. It is strong, and reliable. $7.5K

TRIUMPH 750. This is my 1/2 mile bike. It is very fast, and has had extensive work done to the Transmission. It now shifts like a BSA. Down for high gears, is great for the Hole Shot to turn one. It has a new tank on it, because the Red one started to delaminate. Its got all the right stuff including a NOURISH CRANK. $12K

YAMAHA STREET TRACKER. New Trackmaster Frame, Fresh rebuilt engine, 36 Mikunis, K&Ns, Aluminum Road Race Tank, and very cool up-swept pipes. Its not quite finished yet. Im just deciding on which turn indicaters and tires to use, then final wiring…. If bought as is $12K, If finished $15K

STREET TRACKER Honda CB 750. Less than an hour on a Fresh Re-Build. Aluminum Rims, K&N Filters, 4 into One Exhaust. It gets a lot of attention. $13K

J&M Suzuki RMZ450. Really nice framer. Needs nothing and is ready to go race. Was previously Kevin Varnes national bike prior to the stock frame rule. Fast, and reliable. A&A one piece quick change rear, Penske shock, Jemco Exhaust, brand new tank and tail section with 2 races on it. Adjustable clamps, motion pro throttle, Grimeca brakes. Etc. Bought few months ago to go back racing after recovering from shoulder surgery but it appears that the shoulder may never function right again, so Im done.

Call to discuss further or send me a message, I dont always get good cell service out where I live so usually email or text is easier. Bike is in NE Florida. Im willing to drive a bit to meet up with you midway.

Wanted to buy: pre-1980 yamaha tt500 flattrack/tt bike. Prefer stock motor, kick start but consider any at reasonable budget price, within 500 miles of Chattanooga Tn.

1967 Bultaco Pursang model 42.The engine is a bultaco factory race engine that is fresh. This bike was built and raced by Bruce Reynolds of BR BULTACO and has won numerous championships. Bike is located in Cameron Park, Ca.

2008 rmz450, cams and headwork, about 10 races since engine was fresh. Durell suspension, x-trig adjuster for rear ride height, bunch of powder coated pieces. good tires on bike, 1 brand new golden tire comes with for rear. Spare gears, front brake and rotor for tts, any extra bits I have for it go with. I would like to keep my plastics to hang on the wall so it will come with a fresh blank set. Located eastern Pa.

Nasty fast 1/2 Mile Bike – CR250 With a 310 Big Bore Kit, 38MM Kehin Air Stryker Carb, Boyesen Reed, DPY Cool Head, NPP Down pipe with two spare Jemco down pipes. Late 2016 Cheney frame (purpose built for this engine) Cheney Tree, EX500 Forks, YSS shocks and all of the other really good stuff. 1st Klass Glass including bladder tanks. Very well maintained.

CRF150F frame/swing arm/shock ($150)

CRF230F frame/swing arm/shock ($150)

CR85 shock-just freshened up by SMS $275

CR85 rear wheel w/new17Sun, new Shinko ($375)

CR85 front and rear wheels ($75 each)

XT500 TT bike 19 front/18 rear wheels, DT tires, stock engine with 36MM carb, low pipe, remote starter ($1,600)

Plus shipping with tracking from 76271. Please email for images and questions, and include mobile for texted images. PayPal ok.

It is that time! We only use the motorhome twice a year. It only has about 78K miles. The shower and the stove have literally never been used. It has always been stored under cover. 2006 Four Winds Fun Mover toy hauler with 2 slides and power lift gate, Model 34C: This RV is approximately 36 in length with a Chevrolet Duramax Diesel engine, automatic transmission, Chevrolet C5500 chassis, 5.5K Onan gas generator, patio awning, rear camera system, ducted roof A/C, LCD TV: Some additional features include: Cruise, Tilt, dash CD player, PW, PDL, slide out room toppers, electric/gas water heater, 50 Amp service, power steps, small pass through storage, wheel simulators, one piece windshield, interior roof ladder, 5K hitch weight, 7 soft touch vinyl ceilings, cab over bunk with LCD TV, DVD, Queen Hide-a Bed sofa, booth sleeper, day/night shades, microwave/convection, 3 burner range, sink covers, stack refrigerator, all in one bath, shower and much more. 34C – The Fun Mover by Four Winds is the perfect all-in-one sport recreational vehicle This is an Extra Clean 2006 Four Winds Fun Mover 34C , double Slide Class C Diesel Motorcoach . Slip behind the steering wheel of this coach, and youll feel as if youre in a Luxury Vehicle with a Full Kitchen, Dining, Living Area, Garage, even a Full Bath and Generous Sleeping areas. You have your On-the-Road Accommodations contained with Park-it-Anywhere Convenience! Take it on Weekend Trips to the Dunes or Extended Vacations, the 34C can Easily Adapt to all Outings. Exceptional Economy and Durability from the Chevy diesel engine and drive train means you can relax and enjoy the ride without worrying about your next fuel stop. Truck *Chevrolet Duramax engine, Alyson automatic transmission, *Chevrolet C5500 chassis The cab of this RV is loaded with great features including: *2 slide outs * Plush captains chairs * Pioneer CD/DVD sound system with Navigation * Power windows/locks/mirrors * Climate control system with ice-cold A/C * Tilt/Cruise * Voyager reverse monitor * Center console *Auto leveling system *The living area features some wonderful amenities including: * Folding sleeper couch * Booth dinette * Over-cab sleeper * Plenty of storage cabinets *Residential linoleum throughout *Day/night shades *Flat Screen TV * The equipped Kitchen: * 2 bowl stainless steel sink * 3 burner Atwood cooktop with covers * Convection oven/microwave * 2-door fridge/freezer * And plenty of storage cabinets * Laminate countertops w/lg. The bathroom is set up with: * Stand-up shower with skylight * Counter top with sink * Toilet * Mirrored vanity * Cabinet * And a roof vent with power exhaust fan * The Garage gives you all kinds of options: separated from the living area *locking door and features: * Roof access ladder * Roof access hatch * 2 Detachable Sleeping Bunks * Diamond plate trim * Heavy-duty floors * CD sound system * Overhead cabinets. The exterior that stands out: * Outside entertainment center * 4 walkie talkies *Large A&E patio awning * Several side storage w/deep compartments * Power entry steps * Reverse camera system * Rear hydraulic lift gate * Power roll up door * Tow package *Exterior water hose with nozzle *Powering all of your accessories is a top-of-the-line Onan Quiet Diesel 6000 generator Fun Mover 34C Specification Description Length 340 Width 80 Height 121 Interior Height 70 Hitch Weight 5,000 lbs Gross Weight 22,000 lbs Cargo Weight 26,000 lbs Fresh Water Capacity 50 gals Grey Water Capacity 37 gals Black Water Capacity 37 gals Furnace BTU 30,000 Sleeps 8 Engine Duramax Diesel Engine Turbo V8 Chassis Chevrolet C5500 Slides 2, Air Conditioner, Fuel Type Diesel

All upgraded satellite electronics included. Professionally Serviced and Extremely well maintained!!!!!

All inquiries, please call me at 206-232-ince Holt

2001 XR120 – The Best of everything. Cheney Trees, Baby Ceriani Front Forks. Mika Bars, Pro Taper clutch Perch, Motion Pro Vortex Throttle. Cheney Foot Controls & Nissan Master Cylinder. Brembo Brake Caliper, 17 Quick Change Wheels & Maxis CD5 tires. Engine – 120 Big Bore Kit, Mega Cycle Cam, Kitaco Big Valve head, One off Jemco Down Pipe, Mikuni 24mm Flat Slide wit Custom Intake. Arizona Mad Dog Champ Last Year.

I will sell the bike minus the complete front end and rear wheel for $2,000. Complete Bike $4,500.

Star frame for YZ490. Nickel is excellent. I had the frame built in late 1981. frame numbered 069 on the neck. Got half my junior points on it. Comes with left and right pegs. I set a Yamaha IT490 motor in it that Im throwing in FREE.

4 Piston Yamaha Calipers – 2 available. Theyre in good shape but may need rebuild.

$22.00 for the pair plus shipping from Oregon

21 Forged Wheel Blank – Machined to match Buell. Needs bolt pattern and hub. Usually costs over $150 unmachined.

2 Sets Triple Clamps -Fits forks we made for drag racing. Could be used for garage art.

$40 for all 4 plus shipping from Oregon

We built this frame as the centerpiece for a standup big boy scooter. Made from chrome moly tubing. Just add a complete rear wheel, and complete front end and you have a human powered scooter to get around the pits or wherever. You wont be disappointed in the quality. $150 plus shipping from Oregon

Sandy Kosman SK Racing Products 707-799-

Inventory of early Honda CR125 parts 2 Frames 1-1974 1-1975 lots of everything Tanks, fenders , wheels, cylinders, heads 1 webco, carbs, ignitions, 1 basket engine and more! All $1700 or let me know what you need. Wheatland Missouri

Champion frame w Ceriani GP 35mm Forks – Progressive Rear shocks – Proper WM3X19 WHEELS -HONDA CR250 MOTOR W 470 TOP END STUCK NO PIPE $2500

Left Borrani spool 2 1/4 x 18 2.75×18 Pirelli 36 spoke $150 – Right Wm3x21 spool w Avon 36 spoke $175

Left 3.5x 18 Akron w disc and sprocket and Metz tire 40 spoke $300 – RIGHT WM3X21 4 BOLT SPOOL AKRON

1978 Yamaha TT500 Flat Track Race bike. – 540 Big bore kit and Cam, Remote Start (Kick has been welded up same with compression release), 38mm Mikuni Round slide carb, Pro Tracker exhaust, 99 Yamaha R6 front end, Weiss Aluminum Triple Tree, Knock off rear sprocket, Fiberglass seat and cowl, original aluminum tank. Also throwing in Remote Starter, Size 11 Garner Boots and Light Shoe Brand hot shoe. Bike is Located in Denver, Colorado

2007 CRF450 Honda forks and shock reworked by Noleen, perfect condition, no dents or dings, $695

Rocketboy at cox dot net Eight five eight 442 nine 5 three six

Scammer beware! I have your mothers phone number!

2008 Honda CRF 450 Rear wheel. Comes with everything shown. Straight and true. 18 Excel rim. Agoura Hills, CA

COMPLETE RE BUILT ROTAX 600 MOTOR! NEW CARILLO ROD.97MM.CP PISTON.VALVE JOB.BELT.ETC. NEVER FIRED UPJUST FINISHED.WILL COME WITH 44MM CARB.EXHAUST PIPE.IGNITION.N.E. OHIO

Wanted: Kawasaki F7 flat track pipe. If you can help,

Yamaha xs650. Sitting in a champion frame, vortex bars, aluminum triple clamps, new red glass tank and fender, custom pipes, rk chaIN, 19 inch wheels – runs and rides perfect. Buffalo, NY

Yamaha TT 540 for Sale! Deraked Nickle Frame, custom swing arm, works shocks, vortex bars, New glass and paint, RK chain, new tires, ceramic coated jemco pipe, weiss adjustable clamps, remote start-up!

I bought a 1972 Champion racing XS650 in 2009 and the bike came with these extra set of pipes. They have some surface rust and will need to be welded. They have never been used on a bike. Lewisville, Texas

Honda 2005 CRF450R. Jim Wood built head and carb. Weighted crank. Bill Built shorty downpipe. Race Tech Suspension. Call or text for details.

$3200 or trade for a Vintage Bike in good shape. Southern Cal.

Ducati 749R ready for flattrack racing – Weiss triple clamp. Vortex handle bar, 43mm forks. Sun rim back wheel, comes with computer – Located in Webster, Florida 33597

$5500 will consider reasonable offers only

2002 KTM – upgrad